Industrial Products
 |
Manual Adjustment Pressure Regulators • Precision control overa broad range of pressures • Stainless Steel corrosion-resistant constructions • Non-venting or self-relieving options • Inlet pressures up to 10,000 psi • Outlet pressures up to 10,000 psi • Cv's ranging from 0.01 to 0.6 • Bubble-tight performance • NTP or MS tube end connections |
 |
Servo Dome Pressure Regulators • Regulates liquids and gases • Regulates to ±1% or 2 psi, whichever is greater • Inlet pressures up to 6600 psi • Outlet pressures up to 6000 psi • Cv's ranging from 0.55 to 116.0 • NPT, MS tube or clamp-type connections • Zero fugitive emissions • Line sizes from 1/4″ to 4″ |
 |
Miniature Regulators • Compact design to fit a 1″ by 1.5″ envelope • Set pressure repeatability • Inlet pressures up to 3000 psig • Outlet pressure up to 200 psig • Cv's ranging from 0.01 to 0.06 • Filtered inlet to prevent contamination • Stainless steel construction • 1/8″ FNPT or 1/8″ O.D. tube stubs |
 |
Back Pressure Regulators • Precision regulation of small and large fluid volumes • Instantaneous response to the slightest system pressure variations • Cv's ranging from 0.14 to 9.0 • Gases or liquids including corrosive substances • NPT or MS tube end connections • Line sizes from 1/4″ through 1″ |
 |
Ball Valves • Full port and bi-directional capabilities • Floating ball or trunnion mount designs • Cryogenic models • Pressure ranges up to 10,000 psi • Cv's ranging from 9.0 to 1000 and higher • Bubble-tight performance • NPT, MS tube or clamp-type connections • Line sizes from 1/2″ through 3″ and larger |
 |
Globe and Angle Valves • Bi-directional flow capacity • Cryogenic models • In-line or angle design • Pressures from 0 to 6000 psi • Cv's ranging from 1.16 to 4.77 • Bubble-tight performance • NPT or MS tube end connections • Line sizes from 1/4″ to 1″ |
 |
Solenoid Valves • Gases and liquids • 2-way normally open or 3-way, 2 position normally closed • Quick opening response time • Pressures up to 3000 psi • Cv of 0.3 • NPT or MS tube end connections • Line sizes from 1/4″ to 1/2″ |
 |
Check Valves • Positive shutoff in check direction • NASA tested and approved models • Corrosion-resistant 316 Stainless Steel • Pressures up to 6000 psi • Cv's ranging from 2.5 to 35.0 • Variation of cracking pressures • NPT or MS tube end connectors • Line sizes from 1/4″ to 2″ standard |